Pritidenta | priti®multidisc ZrO2, Multicolor Extra Translucent
Translucency 45%
Bending strength >1,150 MPa
Suitable for
All open milling machines accept round blanks with a diameter of 98.5mm.
Description
The positioning and colour mapping can be adjusted to the right blank height depending on the restoration height.
| Restoration height | Blank height |
|---|---|
| 6 mm – 9 mm | 14 mm |
| 9 mm – 12 mm | 18 mm |
| 12 mm – 14 mm | 20 mm |
| 14 mm – 18 mm | 25 mm |
The positioning data apply mainly to anteriors. For posteriors, we recommend a lower position. This prevents fused cusp areas from appearing too white. An additional positive effect is the warm base hue due to the fissure pits.
Indications
You can use priti®multidisc ZrO2 Extra Translucent to fabricate anterior and posterior custom restorations on natural abutment teeth and implants.
Its unique feature is its balance between high translucency and high flexural strength. This means the material can be recommended without reservation for flexible use across a particularly broad range of indications.
Versatility
Its unique features is the balance between high translucency, high esthetics and high flexural strength of > 1,150 MPa.
Material
- Zirconium dioxide Type II, Class 5 (DIN EN ISO 6872)
- Bending strength >1,150 MPa
- High translucency 45%
- High esthetics
- CTE (10,5 ± 0,5) ·10-6·K-1
- Thin wall thicknesses of 0.4 mm for single crowns in the anterior tooth area and 0.6 mm in the posterior tooth
- Precise edges and margins due to highly compacted material
- Veneering is possible with any ceramic mapped to the CTE of ZrO2
- Cross-batch colour fidelity
- Homogeneous disc shading
- Colour can be reproduced at any time
- Biocompatible