Pritidenta | priti®multidisc ZrO2, Monochrome Opaque
Translucency 35%
Bending strength >1,150 MPa
Suitable for
All open milling machines accept round blanks with a diameter of 98.5mm.
Description
Indications
You can use priti®multidisc ZrO2 Opaque to fabricate partially or fully veneered crowns and bridges (up to 16 pontics)and custom anterior and posterior supra structures on natural abutment teeth and implants.
Its low translucency means it has a strong masking effect. The material is therefore particularly recommended for veneer work on discoloured stumps and metal constructions.
Material
- Zirconium dioxide Type II, Class 5 (DIN EN ISO 6872)
- Bending strength >1,150 MPa
- High translucency 35%
- CTE (10,5 ± 0,5) ·10-6·K-1
- Thin wall thicknesses of 0.4 mm for single crowns in the anterior tooth area and 0.6 mm in the posterior tooth
- Precise edges and margins due to highly compacted material
- Veneering is possible with any ceramic mapped to the CTE of ZrO2
- Cross-batch colour fidelity
- Homogeneous disc shading
- Colour can be reproduced at any time
- Biocompatible